Modular ONE Hydron - waterproof, hard-wearing and easy-care
A special challenge: developing floors that can withstand even the influence of water. Modular ONE Hydron takes on this challenge. Modular ONE Hydron is not only a high-performance and advanced multilayer floor in authentic and contemporary designs. Waterproof and therefore also ideally suited for damp rooms, it withstands all the demands of everyday life - and is also extremely hard-wearing, healthy to live with and easy to maintain.
Oak Urban grey limed
- Wood texture
- 4-sided bevel
- With only 5.5 mm plank thickness very renovation-friendly
- Wide plank
- 1.285 x 196 x 5,5 mm
- 100 % waterproof
For further decor and colour variants, see below.
Parador Modular ONE
Discover all products from the waterproof design floor series
- Trendtime 10 Chevron 60°
- Vinyl til limning
- 0,55 mm slidlag
- 488 × 118 × 2,5mm
- Trendtime 10 Chevron 60°
- Vinyl til limning
- 0,55 mm slidlag
- 488 × 118 × 2,5mm
- Trendtime 10 Chevron 60°
- Vinyl til limning
- 0,55 mm slidlag
- 488 × 118 × 2,5mm
- Trendtime 10 Chevron 60°
- Vinyl til limning
- 0,55 mm slidlag
- 488 × 118 × 2,5mm
- Trendtime 5 Firkantet flise
- Vinyl til limning
- 0,55 mm slidlag
- 457,2 × 457,2 × 2,5mm
- Trendtime 5 Firkantet flise
- Vinyl til limning
- 0,55 mm slidlag
- 457,2 × 457,2 × 2,5mm
- Trendtime 10 Chevron 60°
- Vinyl til limning
- 0,55 mm slidlag
- 488 × 118 × 2,5mm
- Trendtime 5 Storflise
- Vinyl til limning
- 0,55 mm slidlag
- 914,4 × 457,2 × 2,5mm
- Trendtime 5 Storflise
- Vinyl til limning
- 0,55 mm slidlag
- 914,4 × 457,2 × 2,5mm
- Trendtime 5 Firkantet flise
- Vinyl til limning
- 0,55 mm slidlag
- 457,2 × 457,2 × 2,5mm
- Trendtime 5 Storflise
- Vinyl til limning
- 0,55 mm slidlag
- 914,4 × 457,2 × 2,5mm
- Trendtime 5 Storflise
- Vinyl til limning
- 0,55 mm slidlag
- 914,4 × 457,2 × 2,5mm
- Trendtime 5 Storflise
- Vinyl til limning
- 0,55 mm slidlag
- 914,4 × 457,2 × 2,5mm
- Trendtime 5 Storflise
- Vinyl til limning
- 0,55 mm slidlag
- 914,4 × 457,2 × 2,5mm
- Trendtime 5 Storflise
- Vinyl til limning
- 0,55 mm slidlag
- 914,4 × 457,2 × 2,5mm
- Basic 5.3 Storflise
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 914 × 457 × 5,3mm
- Basic 5.3 Storflise
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 914 × 457 × 5,3mm
- Basic 5.3 Storflise
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 914 × 457 × 5,3mm
- Basic 5.3 Storflise
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 914 × 457 × 5,3mm
- Basic 5.3 Storflise
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 914 × 457 × 5,3mm
- Basic 5.3 Storflise
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 914 × 457 × 5,3mm
- HL 2 2.200 * 19 * 85 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Novara 2.570 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Trendtime 8 Chevron-look
- 8 mm planketykkelse
- 2V-Fuge
- 1.285 × 330 × 8mm
- Trendtime 8 Chevron-look
- 8 mm planketykkelse
- 2V-Fuge
- 1.285 × 330 × 8mm
- Trendtime 8 Chevron-look
- 8 mm planketykkelse
- 2V-Fuge
- 1.285 × 330 × 8mm
- FAL 2.200 * 60 * 3,5 mm
- FAL 2.200 * 60 * 3,5 mm
- HKL 2.200 * 25 * 25 mm
- HKL 2.200 * 25 * 25 mm
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- 3 i 1 vinyl profil
- 3 i 1 vinyl profil
- 3 i 1 laminat profil
- 3 i 1 vinyl profil
- 3 i 1 laminat profil
- Style 2.585 * 182 * 10 mm
- Designfuge
- 10.0 mm planketykkelse
- Style 1.280 * 182 * 10 mm
- Designfuge
- 10.0 mm planketykkelse
- RapidoClick 2.050 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.585 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 1.280 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- Novara 1.250 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- DAL 3 2.200 * 34 * 12 mm
- DAL 3 2.200 * 34 * 12 mm
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Excellent surface quality
- Torsion-free
- With high-quality MDF-core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Basic 11-5 3-stav
- Hvid mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Classic 3025 3-stav
- Hvid mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 13mm
- Basic 11-5 3-stav
- Mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Classic 3025 3-stav
- Mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 13mm
- Trendtime 4 Planke
- Mat lak
- 3.6 mm slidlag
- 2.010 × 160 × 13mm
- Trendtime 4 Planke
- Hvid mat lak
- 3.6 mm slidlag
- 2.010 × 160 × 13mm
- Trendtime 4 Planke
- Mat lak
- 3.6 mm slidlag
- 2.010 × 160 × 13mm
- Trendtime 4 Planke
- Naturolieret plus
- 3.6 mm slidlag
- 2.010 × 160 × 13mm
- Classic 3025 Planke
- Hvid mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3025 Planke
- Naturolieret plus
- 2.5 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3025 Planke
- Mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 13mm
- Basic 11-5 Planke
- Naturolieret
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 Planke
- Mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 Planke
- Hvid mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Classic 3060 Planke
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Hvid mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 3-stav
- Hvid mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Hvid mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 3-stav
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Trendtime 3 Sildeben
- Mat lak
- 3.6 mm slidlag
- 570 × 95 × 13mm
- Trendtime 3 Sildeben
- Lak ekstramat
- 3.6 mm slidlag
- 570 × 95 × 13mm
- Trendtime 3 Sildeben
- Hvid mat lak
- 3.6 mm slidlag
- 570 × 95 × 13mm
- Classic 3025
- Hvid mat lak
- 2.5 mm slidlag
- 1.170 × 120 × 13mm
- Classic 3025
- Mat lak
- 2.5 mm slidlag
- 1.170 × 120 × 13mm
- Classic 2025 Planke
- Vinyl til limning
- 0,55 mm slidlag
- 1.219 × 229 × 2,5mm
- Classic 2025 Planke
- Vinyl til limning
- 0,55 mm slidlag
- 1.219 × 229 × 2,5mm
- Classic 2025 Planke
- Vinyl til limning
- 0,55 mm slidlag
- 1.219 × 229 × 2,5mm
- Classic 2025 Planke
- Vinyl til limning
- 0,55 mm slidlag
- 1.219 × 229 × 2,5mm
- Classic 2025 Planke
- Vinyl til limning
- 0,55 mm slidlag
- 1.219 × 229 × 2,5mm
- Classic 2025 Planke
- Vinyl til limning
- 0,55 mm slidlag
- 1.219 × 229 × 2,5mm
- Classic 2025 Planke
- Vinyl til limning
- 0,55 mm slidlag
- 1.219 × 229 × 2,5mm
- Classic 2025 Planke
- Vinyl til limning
- 0,55 mm slidlag
- 1.219 × 229 × 2,5mm
- Classic 2025 Planke
- Vinyl til limning
- 0,55 mm slidlag
- 1.219 × 229 × 2,5mm
- Classic 2025 Planke
- Vinyl til limning
- 0,55 mm slidlag
- 1.219 × 229 × 2,5mm
- Trendtime 3 Sildeben
- Vinyl til limning
- 0,55 mm slidlag
- 770 × 154 × 2,5mm
- Trendtime 3 Sildeben
- Vinyl til limning
- 0,55 mm slidlag
- 770 × 154 × 2,5mm
- Trendtime 3 Sildeben
- Vinyl til limning
- 0,55 mm slidlag
- 770 × 154 × 2,5mm
- Trendtime 3 Sildeben
- Vinyl til limning
- 0,55 mm slidlag
- 770 × 154 × 2,5mm
- Trendtime 3 Sildeben
- Vinyl til limning
- 0,55 mm slidlag
- 770 × 154 × 2,5mm
- Trendtime 3 Sildeben
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 730 × 146 × 5mm
- Trendtime 3 Sildeben
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 730 × 146 × 5mm
- Trendtime 3 Sildeben
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 730 × 146 × 5mm
- Trendtime 3 Sildeben
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 730 × 146 × 5mm
- Trendtime 3 Sildeben
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 730 × 146 × 5mm
- Trendtime 3 Sildeben
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 730 × 146 × 5mm
- Trendtime 3 Sildeben
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 730 × 146 × 5mm
- Trendtime 8 Storplank
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.522 × 225 × 6mm
- Trendtime 8 Storplank
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.522 × 225 × 6mm
- Trendtime 8 Storplank
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.522 × 225 × 6mm
- Trendtime 8 Storplank
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.522 × 225 × 6mm
- Trendtime 8 Storplank
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.522 × 225 × 6mm
- Trendtime 5 Storflise
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 914 × 457 × 6mm
- Trendtime 5 Storflise
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 914 × 457 × 6mm
- Trendtime 5 Storflise
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 914 × 457 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2030 Planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 1.207 × 216 × 9,6mm
- Classic 2030 Planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 1.207 × 216 × 9,6mm
- Classic 2030 Planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 1.207 × 216 × 9,6mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 2.0 Planke
- Vinyl til limning
- 0,3 mm slidlag
- 1.219 × 229 × 2mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 2.0 Planke
- Vinyl til limning
- 0,3 mm slidlag
- 1.219 × 229 × 2mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 3 Sildeben
- 8 mm planketykkelse
- 4-V-fuge
- 858 × 143 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Trendtime 3 Sildeben
- 8 mm planketykkelse
- 4-V-fuge
- 858 × 143 × 8mm
- Trendtime 3 Sildeben
- 8 mm planketykkelse
- 4-V-fuge
- 858 × 143 × 8mm
- Hydron Storflise
- Modular ONE Hydron
- 4-sidet fas
- 856 × 403 × 5,5mm
- Hydron Planke
- Modular ONE Hydron
- 4-sidet fas
- 1.290 × 196 × 5,5mm
- Hydron Storflise
- Modular ONE Hydron
- 4-sidet fas
- 856 × 403 × 5,5mm
- Hydron Planke
- Modular ONE Hydron
- 4-sidet fas
- 1.290 × 196 × 5,5mm
- Sildeben
- Modular ONE
- 4-sidet fas
- 840 × 140 × 9mm
- Hydron Planke
- Modular ONE Hydron
- 4-sidet fas
- 1.290 × 196 × 5,5mm
- Sildeben
- Modular ONE
- 4-sidet fas
- 840 × 140 × 9mm
- Sildeben
- Modular ONE
- 4-sidet fas
- 840 × 140 × 9mm
- Sildeben
- Modular ONE
- 4-sidet fas
- 840 × 140 × 9mm
- Sildeben
- Modular ONE
- 4-sidet fas
- 840 × 140 × 9mm
- Sildeben
- Modular ONE
- 4-sidet fas
- 840 × 140 × 9mm
- Storflise
- Modular ONE
- 4-sidet fas
- 853 × 400 × 8mm
- Storflise
- Modular ONE
- 4-sidet fas
- 853 × 400 × 8mm
- Storflise
- Modular ONE
- 4-sidet fas
- 853 × 400 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Trendtime 1 Stavplanke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 158 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Trendtime 1 Stavplanke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 158 × 8mm
- Trendtime 1 Stavplanke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 158 × 8mm
- Trendtime 1 Stavplanke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 158 × 8mm
- Trendtime 10 Chevron 45°
- Mat lak
- 3,5 mm mm slidlag
- 610 × 90 × 15mm
- Trendtime 10 Chevron 45°
- Mat lak
- 3,5 mm mm slidlag
- 610 × 90 × 15mm
- Trendtime 10 Chevron 45°
- Hvid mat lak
- 3,5 mm mm slidlag
- 610 × 90 × 15mm
- Trendtime 10 Chevron 45°
- Mat lak
- 3,5 mm mm slidlag
- 610 × 90 × 15mm
- Trendtime 10 Chevron 45°
- Mat lak
- 3,5 mm mm slidlag
- 610 × 90 × 15mm
- Trendtime 10 Chevron 45°
- Mat lak
- 3,5 mm mm slidlag
- 610 × 90 × 15mm
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Basic 600 Lang planke
- 8 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 8mm
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Basic 400 Individuel plankeoptik
- 8 mm planketykkelse
- Uden fuge
- 1.285 × 194 × 8mm
- Basic 600 Lang planke
- 8 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 8mm
- Basic 600 Lang planke
- 8 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 8mm
- Basic 600 Lang planke
- 8 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 8mm
- Basic 600 Lang planke
- 8 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 8mm
- Basic 600 Lang planke
- 8 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 8mm
- Basic 600 Lang planke
- 8 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 8mm
- Basic 600 Bred planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 243 × 8mm
- Basic 600 Bred planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 243 × 8mm
- Basic 600 Bred planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 243 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- Uden fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- Uden fuge
- 1.285 × 194 × 8mm
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Trendtime 3 Sildeben
- 8 mm planketykkelse
- 4-V-fuge
- 858 × 143 × 8mm
- Trendtime 3 Sildeben
- 8 mm planketykkelse
- 4-V-fuge
- 858 × 143 × 8mm
- Trendtime 3 Sildeben
- 8 mm planketykkelse
- 4-V-fuge
- 858 × 143 × 8mm
- Trendtime 3 Sildeben
- 8 mm planketykkelse
- 4-V-fuge
- 858 × 143 × 8mm
- Trendtime 3 Sildeben
- 8 mm planketykkelse
- 4-V-fuge
- 858 × 143 × 8mm
- Trendtime 3 Sildeben
- 8 mm planketykkelse
- 4-V-fuge
- 858 × 143 × 8mm
- Trendtime 3 Sildeben
- 8 mm planketykkelse
- 4-V-fuge
- 858 × 143 × 8mm
- Hydron Planke
- Modular ONE Hydron
- 4-sidet fas
- 1.290 × 196 × 5,5mm
- Hydron Planke
- Modular ONE Hydron
- 4-sidet fas
- 1.290 × 196 × 5,5mm
- Hydron Planke
- Modular ONE Hydron
- 4-sidet fas
- 1.290 × 196 × 5,5mm
- Hydron Planke
- Modular ONE Hydron
- 4-sidet fas
- 1.290 × 196 × 5,5mm
- SL 4 2.200 * 19,5 * 60 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 4 2.200 * 19,5 * 60 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 4 2.200 * 19,5 * 60 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 4 2.200 * 19,5 * 60 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 4 2.200 * 19,5 * 60 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Kvartstaf 2.200 * 20 * 14 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Kvartstaf 2.200 * 20 * 14 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Kvartstaf 2.200 * 20 * 14 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Kvartstaf 2.200 * 20 * 14 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Kvartstaf 2.200 * 20 * 14 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Kvartstaf 2.200 * 20 * 14 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Kvartstaf 2.200 * 20 * 14 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Kvartstaf 2.200 * 20 * 14 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 4 2.200 * 19,5 * 60 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 4 2.200 * 19,5 * 60 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 4 2.200 * 19,5 * 60 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 4 2.200 * 19,5 * 60 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 4 2.200 * 19,5 * 60 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 4 2.200 * 19,5 * 60 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Excellent surface quality
- Torsion-free
- With high-quality MDF-core
- SL 18 2.200 * 16,5 * 70 mm
- Excellent surface quality
- Torsion-free
- With high-quality MDF-core
- SL 18 2.200 * 16,5 * 70 mm
- Excellent surface quality
- Torsion-free
- With high-quality MDF-core
- SL 18 2.200 * 16,5 * 70 mm
- Excellent surface quality
- Torsion-free
- With high-quality MDF-core
- SL 18 2.200 * 16,5 * 70 mm
- Excellent surface quality
- Torsion-free
- With high-quality MDF-core
- SL 18 2.200 * 16,5 * 70 mm
- Excellent surface quality
- Torsion-free
- With high-quality MDF-core
- SL 18 2.200 * 16,5 * 70 mm
- Excellent surface quality
- Torsion-free
- With high-quality MDF-core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Excellent surface quality
- Torsion-free
- With high-quality MDF-core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 2 2.200 * 19,5 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 2 2.200 * 19,5 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 2 2.200 * 19,5 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 2 2.200 * 19,5 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 2 2.200 * 19,5 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 2 2.200 * 19,5 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 2 2.200 * 19,5 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 2 2.200 * 19,5 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 2 2.200 * 19,5 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 2 2.200 * 19,5 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 21 2.200 * 25 * 100 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 21 2.200 * 25 * 100 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 21 2.200 * 25 * 100 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- FAL 2.200 * 60 * 3,5 mm
- FAL 2.200 * 60 * 3,5 mm
- FL 1 2.200 * 19 * 50 mm
- FL 1 2.200 * 19 * 50 mm
- FL 1 2.200 * 19 * 50 mm
- HKL 2.200 * 25 * 25 mm
- HKL 2.200 * 25 * 25 mm
- HKL 2.200 * 25 * 25 mm
- HKL 2.200 * 25 * 25 mm
- HKL 2.200 * 25 * 25 mm
- HKL 2.200 * 25 * 25 mm
- HKL 2.200 * 25 * 25 mm
- HL 1 2.200 * 19 * 65 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- HL 2 2.200 * 19 * 85 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- HL 3 2.200 * 19 * 105 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Excellent surface quality
- Torsion-free
- With high-quality MDF-core
- SL 18 2.200 * 16,5 * 70 mm
- Excellent surface quality
- Torsion-free
- With high-quality MDF-core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- DAL 1 2.200 * 40 * 20 mm
- DAL 1 2.200 * 40 * 20 mm
- DAL 1 2.200 * 40 * 20 mm
- DAL 2 2.200 * 40 * 22 mm
- DAL 2 2.200 * 40 * 22 mm
- DAL 2 2.200 * 40 * 22 mm
- DAL 3 2.200 * 34 * 12 mm
- DAL 3 2.200 * 34 * 12 mm
- DAL 3 2.200 * 34 * 12 mm
- DAL 3 2.200 * 34 * 12 mm
- DAL 3 2.200 * 34 * 12 mm
- DAL 3 2.200 * 34 * 12 mm
- DAL 3 2.200 * 34 * 12 mm
- DAL 3 2.200 * 34 * 12 mm
- FAL 2.200 * 60 * 3,5 mm
- FAL 2.200 * 60 * 3,5 mm
- FAL 2.200 * 60 * 3,5 mm
- FAL 2.200 * 60 * 3,5 mm
- FAL 2.200 * 60 * 3,5 mm
- FAL 2.200 * 60 * 3,5 mm
- SL 18 2.200 * 16,5 * 70 mm
- Excellent surface quality
- Torsion-free
- With high-quality MDF-core
- HKL 2.200 * 25 * 25 mm
- DAL 3 2.200 * 34 * 12 mm
- FAL 2.200 * 60 * 3,5 mm
- HKL 2.200 * 25 * 25 mm
- DAL 3 2.200 * 34 * 12 mm
- FAL 2.200 * 60 * 3,5 mm
- DAL 3 2.200 * 34 * 12 mm
- HKL 2.200 * 25 * 25 mm
- FAL 2.200 * 60 * 3,5 mm
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 vinyl profil
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Tilpasningsprofil Modular ONE
- Type 2
- Matched to skirting SL 21
- No miter cut required
- For an optimal and clean inside corner
- Type 2
- Matched to skirting SL 21
- No miter cut required
- For an optimal and clean outside corner
- Type 2
- Matched to skirting SL 21
- No miter cut required
- For an optimal and clean transition
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- Overgangsprofil Modular ONE
- HKL 2.200 * 25 * 25 mm
- DAL 3 2.200 * 34 * 12 mm
- FAL 2.200 * 60 * 3,5 mm
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Type 2
- Matched to skirting SL 21
- No miter cut required
- For an optimal and clean finish
- For repairing scratches and other damage
- Application on lacquered wood surfaces, laminate and design flooring
- For a consistent and clean result
- For sealing and repairing scratches
- Application on lacquered floors
- For a superficial seal and additional protection
- Good room and impact sound insulation
- Compression resistant , expanded Poyster foam
- Protection from rising damp
- Very good room and impact sound insulation
- Permanently elastic laying carpet pad consisting of mineral fillers and polyurethane bonding agents, free of plasticizers
- Specially developed for use under floating design, laminate and parquet floors.
- Excellent room and impact sound insulation
- Permanently elastic laying carpet pad consisting of mineral fillers and polyurethane bonding agents, free of plasticizers
- Protection from rising damp
- Enormous room and impact sound insulation
- Permanently elastic laying carpet pad consisting of mineral fillers and polyurethane bonding agents, free of plasticizers
- Protection from rising damp
- 3 i 1 laminat profil
- Trendtime 5 Storflise
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 914 × 457 × 6mm
- Trendtime 5 Storflise
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 914 × 457 × 6mm
- Trendtime 5 Storflise
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 914 × 457 × 6mm
- Trendtime 5 Storflise
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 914 × 457 × 6mm
- Trendtime 8 Storplank
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.522 × 225 × 6mm
- Trendtime 8 Storplank
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.522 × 225 × 6mm
- Trendtime 8 Storplank
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.522 × 225 × 6mm
- Trendtime 8 Storplank
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.522 × 225 × 6mm
- Trendtime 8 Storplank
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.522 × 225 × 6mm
- Trendtime 8 Storplank
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.522 × 225 × 6mm
- Trendtime 8 Storplank
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.522 × 225 × 6mm
- Trendtime 6 Lang planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 2.200 × 216 × 9,6mm
- Trendtime 6 Lang planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 2.200 × 216 × 9,6mm
- Trendtime 6 Lang planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 2.200 × 216 × 9,6mm
- Trendtime 6 Lang planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 2.200 × 216 × 9,6mm
- Trendtime 6 Lang planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 2.200 × 216 × 9,6mm
- Trendtime 6 Lang planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 2.200 × 216 × 9,6mm
- Hydron Planke
- Modular ONE Hydron
- 4-sidet fas
- 1.290 × 196 × 5,5mm
- Hydron Planke
- Modular ONE Hydron
- 4-sidet fas
- 1.290 × 196 × 5,5mm
- Hydron Planke
- Modular ONE Hydron
- 4-sidet fas
- 1.290 × 196 × 5,5mm
- Hydron Planke
- Modular ONE Hydron
- 4-sidet fas
- 1.290 × 196 × 5,5mm
- Hydron Planke
- Modular ONE Hydron
- 4-sidet fas
- 1.290 × 196 × 5,5mm
- Hydron Storflise
- Modular ONE Hydron
- 4-sidet fas
- 856 × 403 × 5,5mm
- Hydron Storflise
- Modular ONE Hydron
- 4-sidet fas
- 856 × 403 × 5,5mm
- Hydron Storflise
- Modular ONE Hydron
- 4-sidet fas
- 856 × 403 × 5,5mm
- Classic 3025
- Mat lak
- 2.5 mm slidlag
- 1.170 × 120 × 13mm
- Classic 3025
- Mat lak
- 2.5 mm slidlag
- 1.170 × 120 × 13mm
- Classic 3025 Storplank
- Mat lak
- 2.5 mm slidlag
- 2.380 × 233 × 13mm
- Classic 3025 Storplank
- Naturolieret plus
- 2.5 mm slidlag
- 2.380 × 233 × 13mm
- Classic 3025 Planke
- Mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3025 Storplank
- Naturolieret plus
- 2.5 mm slidlag
- 2.380 × 233 × 13mm
- Classic 3025 Planke
- Naturolieret plus
- 2.5 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3025 Planke
- Naturolieret plus
- 2.5 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3025 Planke
- Naturolieret plus hvid
- 2.5 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Lak ekstramat professional
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Lak ekstramat
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Trendtime 8 Planke
- Naturolieret plus
- 4.0 mm slidlag
- 1.882 × 190 × 15mm
- Trendtime 8 Planke
- Naturolieret plus
- 4.0 mm slidlag
- 1.882 × 190 × 15mm
- MilanoClick 2.585 * 289 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- Novara 1.250 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 2.570 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 1.250 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 2.570 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 1.250 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 2.570 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 1.250 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 2.570 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- RapidoClick 1.280 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.050 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.585 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 1.280 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.050 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.585 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 1.280 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.050 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.585 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 1.280 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.050 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.585 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- For care of oiled and waxed surfaces
- Application on oiled and waxed surfaces
- For a fresh and flawless care experience
- For care of oiled and waxed surfaces
- Application on oiled and waxed surfaces
- For a fresh and flawless care experience
- Concentrate for wet cleaning
- Application on any floor covering
- For a streak-free and refreshing experience
- For fast and intensive cleaning of heavily soiled surfaces
- Application on any floor covering
- Für eine schnelle und intensive Reinigung
- For initial care and refreshments
- Application on design floor
- For fast and intensive cleaning
- For regular floor cleaning
- Application on design floor
- For active and effective cleaning
- Basic 600 Bred planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 243 × 8mm
- Basic 600 Bred planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 243 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Classic 2030 Planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 1.207 × 216 × 9,6mm
- Classic 2030 Planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 1.207 × 216 × 9,6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Classic 2070 Planke
- Vinyl med SPC bæreplade
- 0,55 mm slidlag
- 1.209 × 225 × 6mm
- Individuel plankeoptik
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Individuel plankeoptik
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Individuel plankeoptik
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Individuel plankeoptik
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 18 2.200 * 16,5 * 70 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 5 WF 2.200 * 16 * 50 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- SL 3 2.200 * 16 * 40 mm
- Fully coated in the edge area
- Torsion-free
- With high quality MDF core
- Basic 400 Planke
- 8 mm planketykkelse
- Uden fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Basic 600 Bred planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 243 × 8mm
- 520 * 395 * 300 mm
- 520 * 395 * 300 mm
- Basic 11-5 Planke
- Naturolieret
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 Planke
- Mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 3-stav
- Mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 3-stav
- Mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 3-stav
- Mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 3-stav
- Mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 3-stav
- Mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 Planke
- Naturolieret
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 Planke
- Naturolieret hvid
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 Planke
- Mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 Planke
- Naturolieret
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 Planke
- Naturolieret hvid
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 Planke
- Hvid mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 3-stav
- Hvid mat lak
- 2.5 mm slidlag
- 2.200 × 185 × 11,5mm
- Basic 11-5 Storplank
- Mat lak
- 2.5 mm slidlag
- 2.380 × 233 × 11,5mm
- Basic 11-5 Storplank
- Mat lak
- 2.5 mm slidlag
- 2.380 × 233 × 11,5mm
- Basic 11-5 Storplank
- Naturolieret
- 2.5 mm slidlag
- 2.380 × 233 × 11,5mm
- Classic 3060 3-stav
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 3-stav
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Hvid mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 3-stav
- Hvid mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 3-stav
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- matt lacquer
- 3,60 mm wear layer thickness
- 13 mm plank thickness
- Classic 3060 Planke
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 3-stav
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Hvid mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Naturolieret plus
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Naturolieret plus
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Naturolieret plus
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Naturolieret plus hvid
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Naturolieret plus
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Naturolieret plus
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Naturolieret plus
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Naturolieret plus hvid
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 Planke
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Classic 3060 3-stav
- Mat lak
- 3.6 mm slidlag
- 2.200 × 185 × 13mm
- Trendtime 3 Sildeben
- Naturolieret plus
- 2.5 mm slidlag
- 570 × 95 × 10,5mm
- Trendtime 3 Sildeben
- Mat lak
- 2.5 mm slidlag
- 570 × 95 × 10,5mm
- Trendtime 3 Sildeben
- Mat lak
- 2.5 mm slidlag
- 570 × 95 × 10,5mm
- Trendtime 3 Sildeben
- Mat lak
- 2.5 mm slidlag
- 570 × 95 × 10,5mm
- Trendtime 3 Sildeben
- Mat lak
- 2.5 mm slidlag
- 570 × 95 × 10,5mm
- Trendtime 4 Planke
- Mat lak
- 3.6 mm slidlag
- 2.010 × 160 × 13mm
- Trendtime 4 Planke
- Mat lak
- 3.6 mm slidlag
- 2.010 × 160 × 13mm
- Trendtime 8 Planke
- Naturolieret plus
- 4.0 mm slidlag
- 1.882 × 190 × 15mm
- Trendtime 8 Planke
- Naturolieret plus
- 3.0 mm slidlag
- 1.882 × 190 × 14mm
- Trendtime 8 Planke
- Naturolieret plus
- 3.0 mm slidlag
- 1.882 × 190 × 14mm
- Trendtime 8 Planke
- Naturolieret plus
- 4.0 mm slidlag
- 1.882 × 190 × 15mm
- Trendtime 8 Planke
- Naturolieret plus
- 4.0 mm slidlag
- 1.882 × 190 × 15mm
- Trendtime 8 Planke
- Naturolieret plus hvid
- 4.0 mm slidlag
- 1.882 × 190 × 15mm
- Trendtime 8 Planke
- Naturolieret plus
- 4.0 mm slidlag
- 1.882 × 190 × 15mm
- Trendtime 8 Planke
- Naturolieret plus
- 3.0 mm slidlag
- 1.882 × 190 × 14mm
- Trendtime 8 Planke
- Naturolieret plus
- 3.0 mm slidlag
- 1.882 × 190 × 14mm
- Basic 200 3-stav
- 7 mm planketykkelse
- Uden fuge
- 1.285 × 194 × 7mm
- Basic 200 2-stav
- 7 mm planketykkelse
- Uden fuge
- 1.285 × 194 × 7mm
- Basic 200 2-stav
- 7 mm planketykkelse
- Uden fuge
- 1.285 × 194 × 7mm
- Basic 200 Planke
- 7 mm planketykkelse
- Uden fuge
- 1.285 × 194 × 7mm
- Basic 200 Planke
- 7 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 7mm
- Basic 200 Planke
- 7 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 7mm
- Basic 200 Planke
- 7 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 7mm
- Basic 400 3-stav
- 8 mm planketykkelse
- Uden fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- Uden fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- Uden fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- Uden fuge
- 1.285 × 194 × 8mm
- Basic 400 3-stav
- 8 mm planketykkelse
- Uden fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Basic 400 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Basic 600 Bred planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 243 × 8mm
- Basic 600 Bred planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 243 × 8mm
- Basic 600 Bred planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 243 × 8mm
- Basic 600 Bred planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 243 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Classic 1050 Planke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 194 × 8mm
- Trendtime 1 Stavplanke
- 8 mm planketykkelse
- 4-V-fuge
- 1.285 × 158 × 8mm
- Trendtime 5 Storflise
- 8 mm planketykkelse
- 4-V-fuge
- 853 × 400 × 8mm
- Trendtime 5 Storflise
- 8 mm planketykkelse
- 4-V-fuge
- 853 × 400 × 8mm
- Trendtime 5 Storflise
- 8 mm planketykkelse
- 4-V-fuge
- 853 × 400 × 8mm
- Trendtime 5 Storflise
- 8 mm planketykkelse
- 4-V-fuge
- 853 × 400 × 8mm
- Trendtime 5 Storflise
- 8 mm planketykkelse
- 4-V-fuge
- 853 × 400 × 8mm
- Trendtime 5 Storflise
- 8 mm planketykkelse
- 4-V-fuge
- 853 × 400 × 8mm
- Trendtime 5 Storflise
- 8 mm planketykkelse
- 4-V-fuge
- 853 × 400 × 8mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Trendtime 6 Lang planke
- 9 mm planketykkelse
- 4-V-fuge
- 2.200 × 243 × 9mm
- Basic 2.0 Planke
- Vinyl til limning
- 0,3 mm slidlag
- 1.219 × 229 × 2mm
- Basic 2.0 Planke
- Vinyl til limning
- 0,3 mm slidlag
- 1.219 × 229 × 2mm
- Basic 2.0 Planke
- Vinyl til limning
- 0,3 mm slidlag
- 1.219 × 229 × 2mm
- Basic 2.0 Planke
- Vinyl til limning
- 0,3 mm slidlag
- 1.219 × 229 × 2mm
- Basic 2.0 Planke
- Vinyl til limning
- 0,3 mm slidlag
- 1.219 × 229 × 2mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Basic 30 Planke
- Vinyl med HDF bæreplade
- 0,3 mm slidlag
- 1.207 × 216 × 9,4mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Basic 5.3 Planke
- Vinyl med SPC bæreplade
- 0,3 mm slidlag
- 1.209 × 225 × 5,3mm
- Classic 2030 Planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 1.207 × 216 × 9,6mm
- Classic 2030 Planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 1.207 × 216 × 9,6mm
- Classic 2030 Planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 1.207 × 216 × 9,6mm
- Classic 2030 Planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 1.207 × 216 × 9,6mm
- Classic 2030 Planke
- Vinyl med HDF bæreplade
- 0,55 mm slidlag
- 1.207 × 216 × 9,6mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Planke
- Modular ONE
- 4-sidet fas
- 1.285 × 194 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Lang planke
- Modular ONE
- 4-sidet fas
- 2.200 × 235 × 8mm
- Storflise
- Modular ONE
- 4-sidet fas
- 853 × 400 × 8mm
- Storflise
- Modular ONE
- 4-sidet fas
- 853 × 400 × 8mm
- Storflise
- Modular ONE
- 4-sidet fas
- 853 × 400 × 8mm
- Storflise
- Modular ONE
- 4-sidet fas
- 853 × 400 × 8mm
- Storflise
- Modular ONE
- 4-sidet fas
- 853 × 400 × 8mm
- ClickBoard 2.585 * 492 * 12 mm
- Uden fuge
- 12.0 mm planketykkelse
- Feuchtraumgeeignet
- ClickBoard 1.285 * 389 * 12 mm
- Uden fuge
- 12.0 mm planketykkelse
- Feuchtraumgeeignet
- ClickBoard 2.585 * 389 * 12 mm
- Uden fuge
- 12.0 mm planketykkelse
- Feuchtraumgeeignet
- ClickBoard 2.585 * 492 * 12 mm
- Uden fuge
- 12.0 mm planketykkelse
- Feuchtraumgeeignet
- ClickBoard 1.285 * 389 * 12 mm
- Uden fuge
- 12.0 mm planketykkelse
- Feuchtraumgeeignet
- ClickBoard 2.585 * 389 * 12 mm
- Uden fuge
- 12.0 mm planketykkelse
- Feuchtraumgeeignet
- ClickBoard 1.285 * 389 * 12 mm
- Uden fuge
- 12.0 mm planketykkelse
- Feuchtraumgeeignet
- ClickBoard 2.585 * 389 * 12 mm
- Uden fuge
- 12.0 mm planketykkelse
- Feuchtraumgeeignet
- ClickBoard 2.585 * 492 * 12 mm
- Uden fuge
- 12.0 mm planketykkelse
- Feuchtraumgeeignet
- MilanoClick 2.585 * 289 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- MilanoClick 2.585 * 289 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- MilanoClick 2.585 * 289 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- Novara 1.250 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 2.570 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 1.250 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 2.570 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 1.250 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 2.570 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 1.250 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 2.570 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 1.250 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 2.570 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 1.250 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- Novara 2.570 * 200 * 10 mm
- 0 cm-fuge
- 10.0 mm planketykkelse
- RapidoClick 2.585 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 1.280 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.050 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.585 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 1.280 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.050 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.585 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 3.300 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 4.100 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 1.280 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.050 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 3.300 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 4.100 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 1.280 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.050 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.585 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 1.280 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.050 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.585 * 223,5 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 3.300 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 4.100 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 1.280 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.050 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- RapidoClick 2.585 * 223 * 12 mm
- Designfuge
- 12.0 mm planketykkelse
- Style 1.280 * 182 * 10 mm
- Designfuge
- 10.0 mm planketykkelse
- Style 2.585 * 182 * 10 mm
- Designfuge
- 10.0 mm planketykkelse
- Style 1.280 * 182 * 10 mm
- Designfuge
- 10.0 mm planketykkelse
- Style 2.585 * 182 * 10 mm
- Designfuge
- 10.0 mm planketykkelse
- Style 1.280 * 182 * 10 mm
- Designfuge
- 10.0 mm planketykkelse
- Style 2.585 * 182 * 10 mm
- Designfuge
- 10.0 mm planketykkelse
- SL 18 2.570 * 16,5 * 70 mm
- SL 18 70 x 16,5 x 2570 mm
- CB AL 2.580 * 32 * 12 mm
- CB AL 2.580 * 32 * 12 mm
- CB AL 2.580 * 32 * 12 mm
- CB AL 2.580 * 32 * 12 mm
- CB UL 2.580 * 47 * 12 mm
- CB UL 2.580 * 47 * 12 mm
- CB UL 2.580 * 47 * 12 mm
- CB UL 2.580 * 47 * 12 mm
- FAL 2.570 * 60 * 3,5 mm
- For the weekly floor cleaning
- Application on lacquered parquet as well as waterproof surfaces
- For gentle and effective cleaning
- Matched to skirtings SL 4, SL 5, SL 5 WF and SL 18
- For a particularly simple and stable assembly
- Sufficient for a distance of about 10 linear meters
- Matched to skirtings SL 2 and HL 1/2/3
- For a particularly simple and stable assembly
- Sufficient for a distance of about 10 linear meters
- Type 2
- For universal use with SL 3, SL 5, SL 5 WF and SL 18 skirtings
- No miter cut required
- For an optimal and clean inside corner
- As a spacing aid when laying laminate, resilient flooring, Modular One and parquet flooring
- Optimal assembly aid during laying
- For good slip resistance due to the ribbed structure
- For full care of worn surfaces
- Application on design floors
- For a streak-free cleanliness
- For care and refreshment of heavily used floors
- Application especially on white oiled real wood floor
- For additional surface protection, no sanding during renovation
- For care and refreshment of heavily used floors
- Application on oiled real wood floors
- For additional surface protection, no sanding during renovation
- For cleaning, care and maintenance
- Application on white pigmented real wood floors
- sufficient for approx. 50 m²
- For care and refreshment of heavily used floors
- Application on oiled floors
- sufficient for approx. 50 m²
- For long-term sealing
- Application on design floor
- For long-term sealing
- For the repair of damages
- Application on dark laminate floors
- Achieving the perfect shade by mixing
- For the repair of damages
- Application on light laminate floors
- Achieving the perfect shade by mixing
- For the care of heavily used surfaces
- Application on oiled and waxed parquet flooring
- For additional moisture protection
- Very good moisture protection
- Installation on mineral substrates
- Tear-resistant film with a thickness of 0,2mm
- Very good moisture protection
- Installation on mineral substrates
- Tear-resistant film with a thickness of 0,2mm
- Good room and impact sound insulation
- Consists of naturally occurring raw materials
- Specially designed for floating installation (with one-sided fixation) under desingn floor coverings.
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 laminat profil
- 3 i 1 vinyl profil
- 3 i 1 vinyl profil
- 3 i 1 vinyl profil
- 3 i 1 vinyl profil
- Extremely strong power glue
- For mounting skirting boards
- For very good adhesion to many substrates
- For compliance with the distance from the wall during mounting
- Application with ClickBoard
- Easy assembly due to plastic handle
- For the application of glue
- With handy wooden handle
- For a good adhesive structure due to the serrated edge surface
- For the application of glue
- With handy wooden handle
- For a good adhesive structure due to the corrugated edge surface
- A useful tool when laying parquet flooring
- With comfortable felt padding
- Specially developed for click parquet
- A useful tool when laying laminate, resilient flooring, Modular One and parquet flooring
- With comfortable felt padding
- very stable and effective in use
- A useful tool when laying laminate, resilient flooring, Modular One and parquet flooring
- With practical felt padding
- For a very stable and user-friendly application
- For mounting the ClickBoard panels
- Application to wooden structures
- For an area of about 12 m²
- For mounting the ClickBoard panels
- Application on metal structures
- For an area of about 12 m²
- For mounting the ClickBoard panels
- Application to wooden structures
- For an area of about 120 m²
- 70 * 130 * 40 mm
- For mounting the ClickBoard panels
- Application on metal structures
- For an area of about 120 m²
- For the assembly of tongue and groove panels
- Easy assembly by screws or nails
- 3 mm groove cheek
- For the assembly of click panels
- Easy assembly by screws or nails
- 4 mm groove cheek
- Matched to ceiling mouldingss DAL 1, DAL 2 and DAL 3
- For a particularly simple and stable assembly
- Sufficient for a distance of about 10 linear meters
- Matched to skirting SL 3
- For a particularly simple and stable assembly
- Sufficient for a distance of about 10 linear meters
- Type 2
- Matched to skirting SL 2
- No miter cut required
- For an optimal and clean finish
- Type 2
- Matched to skirting SL 4
- No miter cut required
- For an optimal and clean finish
- Type 1
- Matched to skirting SL 2
- A miter cut is required
- For an optimal and clean outside corner
- Type 1
- Matched to skirting SL 4
- A miter cut is required
- For an optimal and clean outside corner
- Type 2
- Matched to skirting SL 2
- No miter cut required
- For an optimal and clean outside corner
- Type 2
- Matched to skirting SL 4
- No miter cut required
- For an optimal and clean outside corner
- For the assembly of end strips
- Application as a fastener
- For a perfect corner joint at 90° corners
- For the assembly of the mounting rail
- Application as a fastener
- For a perfect corner joint at 90° corners
- Type 1
- Matched to skirting SL 2
- A miter cut is required
- For an optimal and clean inside corner
- Type 1
- Matched to skirting SL 4
- A miter cut is required
- For an optimal and clean inside corner
- Type 2
- Matched to skirting SL 2
- No miter cut required
- For an optimal and clean inside corner
- Type 2
- Matched to skirting SL 4
- No miter cut required
- For an optimal and clean inside corner
- Type 2
- For universal use with HL 1, HL 2 and HL 3 skirtings
- No miter cut required
- For an optimal and clean finish
- Type 2
- For universal use with SL 3, SL 5, SL 5 WF and SL 18 skirtings
- No miter cut required
- For an optimal and clean finish
- Type 2
- For universal use with SL 3, SL 5, SL 5 WF and SL 18 skirtings
- No miter cut required
- For an optimal and clean finish
- Type 2
- For universal use with HL 1, HL 2 and HL 3 skirtings
- No miter cut required
- For an optimal and clean outside corner
- Type 2
- For universal use with SL 3, SL 5, SL 5 WF and SL 18 skirtings
- No miter cut required
- For an optimal and clean outside corner
- Type 2
- For universal use with SL 3, SL 5, SL 5 WF and SL 18 skirtings
- No miter cut required
- For an optimal and clean outside corner
- Type 2
- For universal use with HL 1, HL 2 and HL 3 skirtings
- No miter cut required
- For an optimal and clean inside corner
- Type 2
- For universal use with SL 3, SL 5, SL 5 WF and SL 18 skirtings
- No miter cut required
- For an optimal and clean inside corner
- Type 2
- For universal use with HL 1, HL 2 and HL 3 skirtings
- No miter cut required
- For an optimal and clean transition
- Type 2
- For universal use with SL 3, SL 5, SL 5 WF and SL 18 skirtings
- No miter cut required
- For an optimal and clean transition
- Type 2
- For universal use with SL 3, SL 5, SL 5 WF and SL 18 skirtings
- No miter cut required
- For an optimal and clean transition
- Type 2
- Matched to skirting SL 2
- No miter cut required
- For an optimal and clean transition
- Type 2
- Matched to skirting SL 4
- No miter cut required
- For an optimal and clean transition
Reasons for Modular ONE Hydron
Modular ONE Hydron combines know-how and aesthetics to create an innovative approach to appearance and function in wet rooms. All components of Modular ONE Hydron are waterproof. As a result, amazingly real-looking wood decors can be installed in the bathroom. Tile looks are also combined with the outstanding properties of this floor with its warmth, good room acoustics and pleasant walking feel. "Made in Germany" and certified with the Blue Angel, Modular ONE Hydron also meets the highest standards of sustainable living.
